- Val-Racing Top Quality
- The shaft length corresponds to the length of a standard shaft of 440 mm.
- Special Reinforced Drive shafts for sport, hard offroad ,trailer on the towbar!
- The shaft static torsional strength limit is 410 kgf m, twist angle is about 190 degrees. (Tested on a special certified stand, in the laboratory of the car manufacturer).
(Characteristics of the serial production shaft: Static torsional strength limit is not more than 250 kgf m, twist angle is 0 degrees.)
- The spline is made by rolling.
- The shafts are made of certified, structural, alloyed steel of a special grade with the characteristic
- σв - temporary tensile strength (tensile strength limit), MPa = 1980 (at a tempering temperature of 200 degrees)
- This steel is used for the manufacture of torsion shafts and other loaded transmission parts operating under twisting, repeated-variable and high dynamic loads. Related to torsion steels. An original technology of hardening and subsequent straightening of the shaft was used.
