This kit is for a Lada Niva with 1700cc engines to upgrade it to 1860cc
Includes 84mm special pistons with 2 mm displaced piston pin and 84mm stroke crankshaft, special Mahle pistons rings.
Kit includes 2 sets of main bearing sheels, you have to use only shells with holes, due to specific oil channels of this crankshaft.
Also we include two sets of the new thrust rings standard size.
Important info abou the installation!
The increased stroke causes the connecting rods to move further outward, and in some areas, they may come into contact with the engine block.
In such cases, it is standard practice to carefully grind or clearance the block where the rods are touching. This process is known as "clearancing" the block. It's important to:
Remove only as much material as needed to allow safe rod movement.
Ensure the surfaces are smooth, with no sharp edges that could lead to stress risers.
Clean the block thoroughly afterward to remove any metal particles.
You should not modify the rods in those areas, as it can compromise their structural integrity.
We recommend having this done by a professional engine machinist if possible.
You can turn on the subtitles and translate to your language.
https://youtu.be/vE66SPx0lIg?si=DEaT3-ovhfmNWVE7
A new injector Nozzles Product Code: 27776 recommended when you upgrade your injector engine from 1700cc up to 1860cc or 1950cc
With the bigger engine, you need nozzles that will allow to inject more fuel in the cylinder.
Flow 150.0 g/min.
An expert on Lada engine electric must reprogram the computer ECU to use these nozzles.
Gaskets sets can be ordered via these links from our website
Product Code: 20504
Product Code: 70569
Product Code: 23673