The lining is intended for installation on the lower part of the tailgate (trunk) of a LADA NIVA (LADA 4x4), including in the URBAN configuration, as a decorative element, as well as a repair insert.
Installation is done with double sided adhesive tape that comes in kit.
This is one of the problem areas of this car in relation to corrosion.
The lining protects the lower part of the door from external influences, and also allows you to hide corrosion spots.
High quality materials and components - ABS - plastic with a protective layer that prevents fading and discoloration.
INSTALLATION SEQUENCE
Installation must be carried out on a clean, dry vehicle!
INSTALLATION TEMPERATURE NOT BELOW +5ºC
1. Without removing the protective red tape (liner) from the double-sided adhesive tape glued to the lining, attach the lining to the tailgate (trunk). Determine the installation area.
2. Prepare the surface where the double-sided tape will be glued. It must be degreased with alcohol or a degreaser (check on an invisible part of the body).
3. Peel off the small ends (3 - 4 cm) of the red protective tape (liner) from the reverse side, so that by bending them into the outer side of the lining, protruding tongues are obtained. The tongues of the liner must be bent and pressed, making a fold so that they do not return inside the lining.
DO NOT REMOVE the protective tape completely!
4. Attach the door trim to the installation site.
5. Pull out the protective red tape and press the trim firmly against the body.
