Front Full Suspension Kit Sport And Drift for Lada 2101-2107.
Polyurethane bushes.
Reinforced stabilizer -24mm.
Key features of the suspension:
- Upper arms of the original design with a modified position of the ball joint to increase the Castor angle of the front wheels. The increased castor angle affects the speed of the steering wheel return to the zero position.
- Stepless adjustment of the camber angle on the upper arms. Thus, the range of adjustment of the camber of the front wheels is significantly expanded. And in order to prevent the settings from getting lost, an adjustable eccentric limiter is provided.
- The lower arms are as compact as possible, the rigidity of the arms is 4 times higher than the rigidity of the serial arm.
- Maximum contact of the spring with the spring cup on the arm without bending the spring itself.
- It is possible to use any springs, both with and without lowering.
- The track of the front wheels is widened by 115 mm.
- Feather stabilizer Stage 4 with rigidity adjustment due to the choice of the position of the stabilizer strut mount. The design of the feathers allows you to avoid early contact of the wheel with the stabilizer, thereby increasing the turnout.
- Longitudinal adjustment of the stabilizer position for precise adjustment of the stabilizer strut position.
- Stabilizer strut mounting brackets are located inside the lower arms. No protruding parts that could limit the turnout.
- Shortened by 70 mm relative to the standard steering knuckles of the original design by Ivan Ivanov. Increases the turnout of the front wheels, reducing the number of steering wheel turns from lock to lock, increasing the sharpness of vehicle control.
- Durable hexagonal twists of steering rods for adjusting the toe-in of the front wheels.
- Faceplates for installing brakes from VAZ 2108, 2110, 2112 in a standard place (behind the axle). This position of the brakes allows for more turnout and does not have problems with the contact of the brake hoses / calipers with the springs of the front suspension.
Instruction of installing here:
https://clubturbo.ru/upload/manuals/drift_st4_assembly1.0.0.pdf
Attention! Ball joints of the VAZ 21214 model are installed on the upper levers. Part number: 21214-290408286, Product code: 24038.
Important! Unlike standard levers. Silent blocks are pressed into the Stage 4 levers up to the flange. To facilitate the installation of silent blocks, you can grind down the ribbing on the metal body of the silent blocks.
Recommended parameters for the front wheel alignment angles:
Castor 6...7 degrees
Camber -2...-2.5 degrees
Total toe-in -0.15'
